Setting the needle – SINGER W614 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
10
SETTING THE NEEDLE
See Fig.
8 . Raise the needle bar (A) to its highest point, by turning hand wheel to»ard
you by hand. Loosen needle clamp screw B) and then needle can be removed or re
placed. When replacing needie (Flat Side to BACK, in needle clamp push ,t upward as
Lr as it will go into needle clamp hole. Tighten the Needle clamp screw (B) securely
with a screw driver.
a„„ Changing tn. n..di., m.». =n. compi...
rcvCution
o. .»a hand wheat
Is in the correct position,
by hand to be sure the neeaie is
Fig. 8-A
Advertising