Necdh-fabric combinations, Operating the machine, Connecting machine – SINGER 6136 User Manual

Page 12: Needle-fabric combinations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

necdh-fabric combinations

Cor.'oct nocdio selection is closely related to
stitch

quality

and

appearance.

Damaqod

fabric

is almost always caused by a needle that is
bent, burred or that is an inappropriate style
for the fabric and thread you arc using.

The three types of needles most conimonly used

are

tl'o

regular,

bail

point,

and

wedge.

To

obtain good results, the correct si;ie and type
of needle for the fabric and thread you are

using

must

be

chosen,

ftofer

to

the

Fabric.

Thread and Needle Table, page 8.

Result of Using a Oent Nee<llc

operating the machine

CONNECTING MACHINE

fiefore plugging irt your machine, bo sure

the electrical information on the side of the

machine

A.

below

the

hand

wheel

agrees

with

the

range

marked

on

your

electrical

meter.

Connect plug B to machine and plug C to

your socket outlet.

• To turn the machine and light on or off,

press switch as shown,

• To run the machine and control speed,

press the speed controller D with your foot.
The harder you press, the faster the ma­
chine will

S(iW.

CAUTION: Disconnect the power line plug from

the socket outlet when changing noodles, foot

or noodlo plates or w h c f ) leaving the machine

unattended. This eliminates the possibility of

starting the machine by accidentally pressing

the speed controller.

flfiOT!l

IMPOiVIANT

-

Mactunos

for

Groat

t^ritam

and

sonro

ottier

countries

tiaving

similar

wiring

standards

are

shipped trom the factory without a plug for connection to the mains.

■fho v/ires in tiiis mains lead are coloured in accordance with ttie ioffov/ing code:

Blue; Neutral (N)

Brown; Live (L)

As the colours of ttie wuos in the mains load of this appliance may not correspond v/iUi the colourod

in<uKmgs identifying the teimmals m your plug, proceed as follows'

i he wire which is coloured t>luo must bo connactod to Iho terminal which is marked with the

loiter N or coloured black.

Vho wire wtiich is colourod browr» must bo con.iected to the terminal which is marked with the

letter L or coloured red.

U a 13 amp (BS 13S3) plug is used a 3 arnp fuse must bo filled, or of any other typo of [)iug is tised a 6

amp h.ise must be fitted either in the plug or adaptor or at the distribution board.

Advertising