Step 1: bar tack, Step 2: side stitching, Buttonholes – SINGER 6136 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
buttonholes
• Pallom Group Solocior: /
• Stitch l3alanco Dial: Neutral positioti
• Buttonhole J'ool
Always make a lest buttonhole on a sample in
your fabric. Be sure to duplicate thickness of
garment and include interfacing.
If the two lines of stitching in your sample arc
of unequal density refer to the next page.
Place work under buttonhole fool, align centre
marking of buttonhole A with rod tine on foot,
and align end marking of buttonhole B with
horizontal line on foot. Oo not lower the needle.
B
FOUR-STEP BUTTONHOUNG
Step 1: Bar Tack
Turn buttonhole dial ciockwise to stop
1. Position needle in fabric at point A:
Lower the foot and stitch the first bar
tack taking at least four stitches end
ing at point B,
step 2: Side Stitching
Raise needle above fabric by turning
hand wheel fowa/d you.
Turn buttonhole dial olockwiso to step
2. Stitch to the end of buttonhole at
point C.
32