SINGER W6105 - Manual (Page 22)

ZIPPERS
Machine Setting
Presser
I’OOl
Zipper l'Oüt
Stitch
Pattern
hluid RfguLit Sitckli
StUth Sutch Siitth
o
1 t:flside ol needle
Stitch
Width
Stitch
Length
Fabric
Feed
Darn Sew
Zipper fool allows you to stitch right
next to a raised area such as a zipper
or cording. The foot is adjustable so it
can be moved to the left or right side
of the needle without having to turn
the fabric.
Raise needle to its highest position,
attach zipper fool, and set controls for
straight stitching.
To adjust foot for left side of needle:
loosen screw at back of foot and slide
foot to the left so that needle passes
tlirougli notch on right side of fool.
Lower needle slowly to be sure it will
not hit zipper fool, and tigliten thumb
screw.
For right side of needle, slide foot to
tlie riglil.
Zipper package will contain easy to
follow instructions for stitching.
Corded Seam
Cording gives a professional finish to
slipcovers, pillows, cliildren’s clothes
and lingerie.
First, make welting by covering cord­
ing with bias fabric and stitcliing close
to the cord with zipper fool.
'Ilien stitch welting into seam using
zipper foot.
y)
MENDING
Machine Setting
Presser
Foot
11
Zig-zag l o o t
Stitch
Pattern
HliiiJ 'Kc^'ulaf Slrclth
Siiitli Siiit-h Siiich
0
Stitch
Width
//
l W
Stitch
Length
s.
W mi
I'abric
Feed
Darn Sew
dears and patclies can be stitched
easily and quickly with zig-zag stitch.
Tears
Trim ragged edges. Position tear under
needle and stitcli along tear catching
both sides of material.
Witen mending a three-cornered tear,
stitch from each end to center. For
large tears, place piece of fabric under
I c a r for reinforcement.
Patchy
Stitch patch into place around edge
of liole 01 worn area. Trim raw edges
close to stitcltiiig.
40