Threading upper thread – SINGER W1599 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Threading Upper Thread
Raise presser foot.
Set take-up lever to the highest po
sition by turning handwheel towards
you.
Open top cover and put spool into
spool pin.
Caution:
Spool should be put on spool pin
In the manner of Its thread being
drawn from under side of spool.
Thread, following numbers ®-(D.
Pass thread through guide ©then
to ®.
Lead thread thru either side of ten
sion disc (D.
Hook it to lower guide ® from right
to left upwards.
Thread take-up lever (§).
Pass thread to guide ® from right
to left, and needle guide © (use left
one) then to needle eye c®.
Allow about 15cm (6") of thread
extra.
Advertising