Cloth guide, Adjusting thread tension, Cloth guide adjusting thread tension – SINGER W1599 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cloth Guide
Use cloth guide when sewing a long
seam of regular distance from edge
of material.
Set guide in hole on arm, at right of
needle plate, and adjust distance.
Run machine with edge of fabric
touching guide.
Position cloth guide at an angle to
sew a curved seam.
Sew reverse stitches for reinforce
ment at end of seam.
Draw fabric to left wheri sewing is
finished.
Cut threads with thread cutter
behind presser bar.
Adjusting Thread Tension
Test stitch performance on a scrap
of material you are going to use.
With correct tension ( ® ), upper
and lower threads tension is equal
and strong enough to lock both
threads in center,
if upper tension is too tight (loose),
upper (lower) thread lies straight
along upper (lower) surface of fabric
((g)
© ). Correct by turning ten
sion dial.