Changing needle – SINGER W1599 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Changing Needle
Set needle in the highest position
by turning handwheel towards you.
Loosen needle clamp screw and
take out needle.
With flat face away from you, insert
a new needle into groove of needle
bar.
Push needle until it reaches stopper
@ and tighten needle clamp screw
firmly.
Always use a straight needle with a
sharp point.
Using defective or worn needles not
only causes stitch skipping, break
age of needles or snapping of
thread: it also can damage hook
and needle plate.
Advertising