Sewing on buttons – SINGER W1599 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
7. SEWING ON BUTTONS
Set machine as shown.
Position a button and material un
der foot. When needle comes to left
side of stitch, lower foot. Raise
needle and adjust zigzag width so
that needle comes to right hole of
button.
Make one stitch be certain that nee
dle is aligned with botton’s holes.
Run machine at medium speed and
sew 5-6 zigzag stitches.
Stop machine when needle is in
upper position.
(a,
Set zigzag width control to 0,
align needle with button’s hole and
sew 3-4 stitches to prevent stitches
from unlocking.
OR
b. Remove work and cut off
threads.
Draw thread ends through to wrong
side and tie a knot.
Advertising