SINGER W1599 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Set machine as shown.
19. APPLIQUE WORK
Draw design on material to be used
as an applique and cut it out.
Place cut-out on base material and
baste it.
Sew around outline with zigzag
stitch adjusting stitch length and
width according to shape and size
of cut-out and type of base material.
To change direction at corners, or
to sew very small circles, stop
machine, positioning needle just
away from edge of cut-out, lift press
er foot and turn material. Lower
presser foot and continue sewing.
Sew a few stitches at end with zig
zag width at 0.
This is to prevent unstitching.
Advertising