SINGER 251 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1 3
TO THREAD THE BOBBIN CASE
Hold the bobbin so that the thread will
unwind in the direction shown in Fig. 16.
Hold the bobbin case as shown In Fig. 16
and place the bobbin into it.
SLOT
NEAR
TOP
I /
/ \
Draw the thread into the delivery eye at the
end of the tension spring, as shown in Fig. 18.
Fig. 16. Placing Bobbin
in Bobbin Case
Pull the thread into the slot 1 and under
the tension spring 2, Fig. 17.
3. DRAW
THREAD
Fig. 18. Drawing the Thread
Under the Tension Spring
Advertising