Picking-up lower bobbin thread, Regulating pressure – SINGER W811 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Re(
anc
Tht
Tht
Sei
Mo
Rel
PICKING-UP LOWER BOBBIN THREAD
Raise presser foot.
Holding upper thread, turn
hand wheel toward you
one rotation.
When take-up lever is at its
highest position, pull thread
to pick up loop of lower
bobbin thread.
Pull both upper and lower thread
"to the left of" presser foot ap
proximately 6 inches.
This will prevent jamming.
REGULATING PRESSURE
Fig. 1
Fig. 2
The
amount
of
pressure
that
is
applied
to
the
fabric
by
the
press(
foot
is
adjusted
by
the
pressure
cap
(1).
The
upper
position
gives
th
least
amount
of
pressure
while
the
lowest
position
gives
maximui
pressure.
To
increase
the
pressure,
push
down
on
the
pressure
cap
to
obta
the
desired
setting.
To
decrease
the
pressure,
press
down
on
tf
snap lock ring (2) to allow the pressure cap to return to its maximu
height. Then reset to the proper pressure.
Normally the pressure cap will be in the lowest position. If the tc
layer of fabric tends to push out further than the bottom layer
fabric. Pressure should be decreased. This often happens on bull
fabrics, such as wools, and on knits.
10