SINGER W130 - Manual (Page 14)

L O C K I N f i Z I S Z A G R E G U L A T I N G L E V E R
To lock the zigzag regulating lever
so that the machine sews a uniform stitch
width, first move the zigzag regulating
lever unto the zigzag indicator is under
the number on the zigzag indicator plate
that you desire.
Turn the zigzag lock clockwise to lock
the position.
CAUTION : Do not release the zig
zag regulating lever until after you have
released the zigzag lock and release
screw.
You will notice that the zigzag indi­
cator is locked on the number which the
zigzag indicator was set under. If the
zigzag indicator is locked under any
number larger than “0" up to “SlY’, you
will notice that when the zigzag regu­
lating lever is moved from side to side,
the zigzag indicator will move from that
number to # 4. When the zigzag regu­
lating lever is released, the zigzag indi­
cator will return to the number under
which it was locked. To release the zig
zag regulating lever, turn the zigzag lock
counter clockwise.
CAUTION : When you turn the zig
zag lock and release screw, do not
hold the zigzag regulating lever.
(Fig. 33) ■
-.-•V -
/ J U
Fig.
f ] I]
iOC* 0 1 ? 34
12