Embroidering and monogramming, Darning – SINGER W130 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
23. EMBROIDERING AND MONOGRAMMING
1. Release pressure of presser foot. Lower
fabric feeders. Lock zigzag indicator
into position "2” under the zigzaa
indicator plate. Put material into em
broidery hoop, then place under foot.
Lower foot, then turn the fly wheel
toward you by hand and raise the
lower thread through the material so
that both the upper and lower threads
are on top of your material.
2. Sew at medium speed. Move material
slowly so that the thread will be close
together as in a satin stitch. With a
little practice you will be able to do
many types of designs and gain a great
deal of pleasure from your machine.
Fig. 6 0
24. D A R N I N G
1. Release the pressure of the presser
foot. Lower the fabric feeders, and
place the material under the foot and
lower the presser bar.
-NPT~F ■ This enables you to move
the material in any direction while
the machine is running.
2. Sew around the areas you desire to
darn. Then move the material back
and forth, sewing out beyond the worn
or open place in the material. Con
tinue until the hole is covered, going
both sideways and forward and back.
MOTE : While darning, run the machine
at medium speed.
21