To prepare for sewing – SINGER WF111 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TO PREPARE FOR SEWING
NEEDLE THREAD PICKS UP BOBBIN THREAD AS H)LLO\\ S.
Holding the loose end of the needle thread m your
left hand, turn the balance wheel toward you by hand
„pril the needle moves down and up again to its
highest point. Pul the needle thread gently and the
bobbin thread wil come up with' it through the
needle hole. ^
^
If the bobbin thread does not rise, check to see if at
least 3 or 4 inches of bobbin thread' is hanging
loosely from the bobbin case. Then place both ends
of the thread back between the two presser foot toes.
Advertising