Straight stitching, Zigzag stitching – SINGER WF111 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STRAIGHT STITCHING
In order to sew an ordinary manner, it is necessary to disconnect the Automatic Mechanism by
taking off the cam from the Cam Holder.
Remove zigzag stitch hinged presser foot and attach straight stitch presser foot to presser bar. It is
advisable to use straight stitch presser foot when sewing flimsy fabric such as silk, summertime
fabrics, but when sewing such as cotton dresses, other house dresses, zigzag stitch hinged presser
foot can be used.
Follow the below procedure :
a) Turn the Zigzag Regulating Dial clockwise as far as it goes,
b ) Open the Lid of the Cam Holder on top of machine and remove the cam.
e ) Push back the Dial to its normal position.
d) Regulate the ZigZag Stitch Dial in zero position and set the stitch length at the desired stitch
length.
ZIGZAG STITCHING
To set the machine for desired ZigZag stitch width follow the below procedure.
a) Loose the two nuts (B) at Page 15.
b) Move the zigzag stitch dial along the graduated scale until it reaches the desired width and
hold the dial by hand in this position.
c) To fix the zigzag stitch dial in this position, tighten the nuts firmly, and commence sewing.
.. -..24 -...-