SINGER WF111 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fifbi of all, loüstu tbt luck screws
tBi
and set liic
stopper (C) at desired width position respec
tively. Tighten the lock screws (B) setting the
zigzag width stopper (C) at the number desired.
Thus, a running zgzag stitching is made.
The lock screws move the width stoppers (C) right
and left at the same time.
Set
the
width
stoppers fCi at
the number
graduated on
the plate. The
numbers indicate
the
width of zigzag stitches in MILLIMETERS when the Zigzag width lever (A) set to “4”, the
width of Zigzag stitches become the largest and when the lever (A) is set to "O", to extreme
left, the stitches will be straight as in an ordinary manner.
T7