Quilting, Cording – SINGER WF111 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
QUILTING
Set machine as for sewing without Automatic Mechanism.
ZigZag Stitch Dial: At 0 position.
Stitch Length Dial: Any desired length.
Upper Tension : Normal.
Fresser Foot:
Zigzag Stitch Hinged Foot Quilting
Attachment.
.
First of all, attach adjustable quilting stitchguide to presser
foot bar, as shown. Place fabric under presser foot and line
it up under needle on line to be stitched.
Move curved guide bar to right as far as necessary to
mark desired line of parallel
stitching.
Stitch first
Move material to right until curved guide bar is direct >
over the first stitched line. Needle will then be directly
over point where second line of stitching will be made.
CORDING
Remove zigzag stitch hinged foot and attach cording foot
to presser bar. Insert cord into the hole in the base of
cording foot, then pull it, from front to back, through the
hole and guide it afterwards underneath the presser foot.
— 30