SINGER WF111 - Manual (Page 32)

BUTTON HOLES
Use Buttonhole* foot. Set zigzag stitch dial to 2 to 2.5
position. Start sewing to be desited length and stop with
needle on the leftside, leaving needle in the cloth and give
fabric half a turn anticlockwise. . Raise needle and zigzag
stitch dial at twice width.. Hold fabric in its place and with
a few stitches, make bar. Take needle out of fabric and
place zigzag stitch dial hack on previous number. Sew again
length of buttonhole, then move zigzag dial at 0 position
and make a few stitches to finish off. Cut buttonhole open
with button hole cutters. In case you want to make very
strong buttonholes, it can be done by using a length of cord
and follow its procedure as sewing CORDING as previously
stated.
ADJUSTABLE CLOTH STITCHING GUIDE
With the aid of this guide the operator is able to sew as
close to the edge of the material as desired, and to keep
the stitches at a uniform distance from the edge.
1) Attach cloth guide to bed of machine by means of
thumb screws which fit into the screw holes in the bed
of the machine.
2) After having adjusted cloth guide to desired distance,
tighten thumb screws securely and commence sewing.
-3U