SINGER W1415 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WlNDJiNG TH£ BOeeiN
. Release dutch by turning clutch
knob
toward you.
. Draw
thread from
spool through
bobbin winder tension disc as shown.
Pull end of thread through hole in
bobbin as shown.
Place
bobbin onto
bobbin winder
shaft with end of thread coming from
the top of the bobbin. Push bobbin
winder shaft to the right until it dicks.
Holding onto
end of thread, start
machine. When bobbin is slightly
filled, clip off end of thread.
Wind
thread until
winder stops
Remove bobbin. Clip thread. '
Tighten clutch knob.
-1 4 -
Advertising