SINGER W1415 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Changing Sewing Directions

^

tj--

and tunn rhp balance wheel towards you to

bring the needle down into the fabric. Raise the presser foot.

2

.

Pivot the fabric around the needle to change direction as

desired.

3. Lower the presser foot and continue the sewing.

Fastening Seams

1. For fastening the ends of seams, press down the- reversing

button and sew-several reverse stitches.

2. To remove the fabric, raise the presser foot and draw the

fabric away from you.

3. Cut threads on thread cutter at the rear of presser bar or

with a pair of scissors.

Leave about 15 cm or 6 inches of thread hanging from the

needle eye.

-19^

Advertising