SINGER W1415 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
-cAN1 Nu r rtfc OTTu t f t-C
Remove plug from the power supply.
.
To remove shuttle:
Raise needle to its highest position and remove bobbin case.
Turn levers away from shuttle and lift out retaining ring and
shuttle, by grasping center pin.
Clean the reverse side of feed dog with a small brush. Remove
lint .and thread from all parts of shuttle and wipe with a lightly
oiled cloth.
To reassemble;
Hold shuttle by center pin and fit carefully back into shuttle
race, forming perfect circle with shuttle driver.
Replace retaining ring polished side out, making sure the bottom
pin fits into notch .Lock retaining ring by turning levers back into
position. Put bobbin back in .bobbin case.
- 2 9 -