I© ^ 1 – SINGER W1415 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I'HHEADiWS THE .^JSeDLS
Ptace spool on spool pin as shown, with
%-he-thread-coiTiIrtg'from-ths^^ baek" of the
spool.
Draw thread through top thread guides.
Holding spool stationary with right hand,
pull the end of the thread between the
tension discs as shown above (^ .
Pull the end of,the thread taut with left
hand. This will puli the spring wire up
and past the end-of the hook. The thread
will then slip into the hook when the
spring is released as in (T) .
Release spool of thread and thread
machine throwh take-up lever (§) and
thread guide (s) as shown above. Thread
then passes through guides (?) and
(I).
Thread needle @ from front to rear.
i© ^
1
\_________ \ 1
©
N
,
'
'!
f /
[® ^
1
k
V
_16_