Sewing in reverse, Adjusting pressure and feeding of fabric, Setting the stitch length – SINGER W1222 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE STITCH LENGTH
The length of the stitch is regulated by the stitch length control
dial (@, Fig. 1) Near 0 is the shortest stitch and 5 is the longest,
But the control may be set at any spot between marking for a
variety of lengths. Turn the control dial to the right to lengthen
and to the left to shorten the stitch.
STITCH LENGTH CHART (Approximate)
Figures on indicator
0 1
2
3
4
5
Number of stitches par inch
No Feeding 30
15
10
7
6
SEWING IN REVERSE
When you wish to sew backward to tie the threads at the
beginning or end of a seam, press in the push button (®, Fig. 1)
as far as it will go. The machine will sew backward as long as the
button is held in.
ADJUSTING PRESSURE AND FEEDING
OF FABRIC
GENERAL SEWING. For normal straight stich and zigzag
stitching, the pressure bar cap or darner release. Fig. 17 and
18 is at its lowest position and the drop feed dial Fig. 16 is
set to "UP" position.