Placing of pattern cam for embroidery sewing – SINGER W1222 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
11
f
# # #
• • e ,
Pattern Cam and box
PLACING OF PATTERN CAM FOR
EMBROIDERY SEWING
1) Use regular zigzag pressure
r '
foot and needle plate.
I
2) Open the cam cover lid (f). ^
Fig. 20.
! ■ '
3) Set S.S lever to "M" position.
4) Turn Z.B dial to position 5
this permits the insertion of
cam on to the spindle (
3
).
Revolve cam, pressing down
slightly until hole in bottom surface is fitted over pin ®,
5) Close cam cover lid and return Z.B dial to "0" position.
6) Set stitch length between O and 1 for effect desired the shorter
the stitch length the greater the density of pattern sewn.
Fig. 20
Advertising