Straight stitching, Zigzag stitching, Straignt stitching zigzag stitching – SINGER W1222 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
STRAIGHT STITCHING
(D Set S.S lever ® to "M" position.
(D Set Z.B dial (
2
) at "Opposition.
(D Select desired stitch length by turning stitch length dial (D 0 - 5.
For more precise straight stitching on special fabrics this machine is
equipped with a straight stitch needle plate (flO, page23) and straight
stitch presser foot (#11, Page 23) please note both accessories have
a small round hole instead of the wide slot as used for zigzag sewing.
A cam is not required for straight stitching.
To change needle plate, remove the setting screws on the plate,
replace with straight stitch needle plate and tighten screws securely.
ZIGZAG STITCHING
® Use regular zigzag presser foot and zigzag needle plate. (Slotted)
(
2
) Cams are not required for normal zigzag sewing.
(
3
) Set S.S lever to "M" position.
© Select width desired from 0 to 5 on Z.B dial.
® Length of zigzag stitch can be varied by increasing the size of
the stitch length.