SINGER 29K73 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO THREAD SHUTTLE FOR 29K72
Fig. 13
Place bobbin into shuttle and push back the re
taining
spring
which
will
hold
the
bobbin
in
the
shuttle.
With the right hand, draw the thread into the slot
in the edge of the shuttle as far as possible. See Fig. 14.
Hold
the
bobbin
between
thumb
and
forefinger
of
right hand with the thread leading from right to left.
Hold the shuttle in the left hand with its open end
up
and
its
retaining
spring
moved
outward.
See
Fig. 13.
Then draw thread to the left, up, and to the right
under the spring. See Fig. 15.
Now insert end of thread up through the small hole
in the edge of the shuttle and through the eye in top
of the bobbin position post. See Fig. 16.
Fig. 16