K-distance – SINGER 29K73 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

16

TO TIME THE SHUTTLE

Turn hand wheel until eccentric stud is aligned with

screwdriver hole D2, Fig. 37.

1/3

K-DISTANCE

r'

Fig, 37. Location of Eccentric Stud for Timing Shuttle

Fig. 38. Correct Timing of Shuttle Carrier

To time the shuttle, turn eccentric stud at hole D2

until the leading edge of the shuttle carrier moves at

each

oscillation

to

a

position

approximately

one-third

the

distance

across

the

needle

slot

below

the

face

plate as shown in Fig. 38.

NOTE: Shuttle is removed in Fig. 38 to illustrate

correct timing of leading edge of shuttle carrier.

Advertising
This manual is related to the following products: