SINGER 29K73 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO THREAD THE SHUTTLE FOR 29K71 AND 29K73
Fig.lO
Turn
shuttle
over
while
holding
bobbin
in
it
and
draw the thread into the slot in the edge of the shuttle
and under the end of the tension spring. See Fig. 11.
Hold the bobbin between the thumb and forefinger
of right hand, the slot in the edge of the bobbin being
at the bottom. Allow two or three inches of thread to
hang free.
Hold
the
shuttle
in
the
left
hand
with
the
wide
opening
uppermost.
Let
end
of
thread
pass
'through
shuttle
opening,
then
place
bobbin
into
shuttle.
See
Fig. 10.
Fig. 11
Pass the thread through delivery eye which is in
the upper edge of the shuttle. See Fig. 12.
Fig. 12