SINGER 29K73 - Manual (Page 5)

DESCRIPTION
Machines 29K71, 29K72 and 29K73, for stitching boots, shoes, and other tubular work in leather and
fabrics, have the following characteristics:
Single Needle, Lock Stitch.
Stop Motion Hand Wheel—releases hand wheel from stitching mechanism for bobbin winding.
Horizontal Oscillating Shuttle.
Eccentric Adjustment for Shuttle Timing.
Cylinder Bed.
Replaceable Steel Horn.
Universal Upper Feed for Stitching in any direction without turning the work.
Stitch Length: 7 to 1 5 to the inch, depending on material being stitched and operations performed.
Presser Foot rise during feeding action; 1/4 inch — (Maximum clearance: 3/8 inch).
Double End Needle Plate — (two sizes of needle holes at each end for various sizes of needles).
Adjustable Thread Take-up Lever.
Two Speed Machine Pulley.
ACCESSORIES AVAILABLE UPON ORDER
(at additional charge)
Stand for mounting the machine
Attachment for fitting Hand Wheel on front of machine (Part No. 82121).
601405 or 601407 for foot power.
^601406 or 601 408 for elfectric power.
Detachable Work Table for flat stitching operations (Part No. 83739, 83740, or 83741).
Electric Transmitter S-9.
SPECIAL FEATURES
MACHINE 29K71
End of cylinder bed is 1 inch wide and 7/8 inch deep.
Space at right of needle 12-1/4 inches.
Diameters of belt grooves 2-7/8 inches and 4-7/8 inches.
MACHINE 29K72
End of cylinder bed is 1 -5/32 inches wide and 1-1/16 inches deep.
Space at right of needle 17-1/2 inches.
Diameters of belt grooves 3-1/4 inches and 5-1/2 inches.
Large Bobbin.
MACHINE 29K73
End of cylinder bed is 1 inch wide and 7/8 inch deep.
Space at right of needle 17-1/2 inches.
Diameters of belt grooves 3-1/4 inches and 5-1/2 inches.