Adjusting pressure and feeding of fabric, Adjusting pressure and feed -14 – SINGER W7911 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
13
Fig. 17
Fig. 14
Fig. 18
ADJUSTING PRESSURE AND FEEDING OF FABRIC
GENERAL
SEWING.
Usually
for
straight
sewing,
the
pressure
bar
cap
or
darner
release,
Fig. 18, is at its lowest position and the drop feed buttons are both set at the same height
Tress up button all the way down and it will spring back to the correct height) Fig. 19.
SEWING THIN OR LIGHT WEIGHT FABRICS.
When
lighter
pressure
is
required
to
sew
satisfactorily
on
thin
silk
or
filmy
material,
the
pressure
cap
should
be
about
halfway down. Release all the way by pressing the snap lock,
A, Fig. 20, and then press cap B down again to half way spot.
Lower the feed slightly by pressing the down button (Fig. 19)
'
to the red line.
Fig. 19