SINGER W616 - Manual (Page 14)

1 5
i
E. Drop feed, set stitch width lock at 5, take 3 or 4 stitches, leave needle in fabric left of
stitches. Pivot fabric on needle to make next daisy petal. Continue until flower design is complete.
Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.
EMBROIDERING WITH A HOOP
It is easy to follow a stamped design or to
work free hand when embroidering or monogram-
h'9- 26). Release the pressure from
the foot by pressing down on the snap lock ring
darner. Push the drop feed button down all the
way.
Stretch the fabric in an embroidery hoop, and
place under the needle after removing the pressef
° ° 1 I stitch width at the size you prefer
and lower the presser bar lifter. Then operate the
me at a rather high speed while moving the
the *^ne^edT^ '^'•h both hands. Work carefully and be sure to keep fingers out of the path of
IcJ
is ^1 rl encounter skip stitches, the fabric is not stretched tight enough or a darning spring
(see attachments available from your dealer illustrated in the back of this book),
d a r n o r m o n o g r a m w i t h o u t h o o p
place^r*^! '^°''n or monogram without embroidery hoop, leave zigzag presser foot in
j. ^ l’ ® a pressure on presser foot, set stitch length at 0, set zigzag stitcl» width to suit,
^^eave teed in sewing position,
^ K L ornirig or monograming in this manner, the fabric must be held taut or skipped slitrfies
'"III be encountered