Adjusting the tensions – SINGER W616 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
ADJUSTING THE TENSIONS
Always
adjust
the
upper
tension
with
the
presser
foot
down,
as
the
tension
is
released
when
it
is
raised.
To
increase
the'
tension on the upper thread, turn dial (Fig. 15) to the right, or
clockwise; to decrease, turn to the left. The higher the nun^ber
on the dial the tighter the tension. Before adjusting lower tension
be sure that the machinp is threaded properly.
When it is necessary to change the bobbin tension, turn the
small screw (Fig. 17) on side of the bobbin case clockwise to tighten
counterclockwise to loosen.
G
bar
the
SI
V
silk
dov
20
)
the
red
Fig. 16 A
Fig. 16 B
Fig. 16-C
When
the upper and under
tensions are properly
balanced, a
perfect stitch will
be
formed
with both
threads interlocking in fabric (Fig. 16-A)
When
the upper tension is
too light,
the lower
thread is pulled up over the upper thread which is
lying flat on the fabric (Fig. 16-B)
When
the upper tension is
too loose,
the upper
thread forms loops over the lower thread lying flat
on the fabric (Fig. 16-C).
B