To remove, To attach – SINGER W1411 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
To Remove:
. .
1
Turn the balance wheel towards you until the needle is at its highest position.
Raise the presser foot by lifting the presser foot lifter.
2
By lifting the lever on the back of the foot holder, the presser foot will drop off.
Note; *Do not force the presser foot to remove it.
REMOVING AND ATTACHING THE PRESSER FOOT
To Attach:
1 Place the presser foot so that the pin on the foot lies just under the groove of the
foot holder. Lower the foot holder.
2 When the presser
foot lifter is raised you'll find the presser foot is locked in place.
Advertising