Removing or attaching the foot holder, To remove, To attach – SINGER W1411 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOVING OR ATTACHING THE FOOT HOLDER
It is not necessary to remove the foot holder unless you use blind stitch hem guide or
to allow clearance when you clean the feed dog.
To Remove:
Raise the needle to its highest position by turning the balance wheel towards you, and
lift the presser foot.
Remove the foot from the foot holder and loosen the foot holder screw with a screw
driver.
To Attach:
,
.
Raise the needle to its highest position by turning the balance wheel towards you, and
lift the presser foot lifter.
When attaching the foot holder to the presser bar, push it up as far as it will go and
tighten .the screw firmly with a screwdriver.
1 1