How to adjust the bobbin thread tension – SINGER W1411 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Generally, thread tension should be controlled by the thread tension dial. Bobbin thread tension has been
adjusted at the factory and readjustment is scarecely needed except for special stitch, thread and fabric. Bobbin
thread tension is just right when you can pull the thread from bobbin case easily with a little resistance.
Thread tension may be adjusted by tightening or loosening the thread tension dial, if necessary.
REGULATING THE THREAD TENSION
Properly adjusted thread
tension for straight sewing
I lie nceiHe ihtead .ind !iic
shoiikl inlorlock m flu- ^-ciifc
hohhin fhuuuJ
ol iwt> ijvors ()l lahr
The needle thread is too
tight
1 he hohhm
fhtead ap
pears on flu.
upper smtiii
ol the tahru
oosen Ihe needle Ihread tension bv
loving the dial to ihe lower number
The needle thread is too
loose
aa
^How to adjust the bobbin
thread tension
‘There are many reasons for having to reset your tension. The best tension for one fabric may not be correct for
another. The required tension depends upon the stiffness of fabric, thickness of the fabric, numbers of layers of
fabric being sewn, as well as the type of stitch you are making.
*lt is better to test the stitching on a scrap of the fabric you are using before starting to make a garment.