SINGER W1411 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THREADING THE NEEDLE THREAD
spool pin as shown, with
from the back of the
Place spool on
thread
coming
spool.
Draw thread through top thread guides.
Holding spool stationary with right hand,
pull the end of the thread between the
tension discs as shown above .
Pull the end of the thread taut with left
hand. This will pull the spring wire up
and past the end of the hook. The thread
will
then
slip
into
thejiook
when
the
spring is released as in .
Release
spool of thread and ^thread
machine throug^h take-up lever '¿i and
thread guide 6' as shown above. Thread
then passes through guides
\ T '
and y8 ■.
Thread needle ,9' from front to rear.