Raising the bobbin thread – SINGER 6212 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
RAISING THE BOBBIN THREAD
Once the needle has been threaded and the bobbin placed in the bobbin case, the
bobbin thread must be brought up through the hole in the needle plate.
1. Hold needle thread loosely with left
hand.
• Turn hand wheel slowly toward
you, lowering needle into hole in
plate.
2. Continue to do this until needle
rises above needle plate.
• Pull gently on needle thread and
bring up bobbin thread in a loop.
3. Open loop with fingers to find end
of bobbin thread.
Draw needle thread through left
side opening in presser foot.
' Pull both threads to back of ma
chine.
13
Advertising
This manual is related to the following products: