Straight stitching, Stitch width selector, Needle position selector – SINGER 6212 User Manual

Page 16: Stitch length selector, Section 3. straight stitching

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3. STRAIGHT STITCHING

STITCH WIDTH SELECTOR

Before you move the selectors to set

your machine for straight stitching, turn
the hand wheel toward you until needle
is above the needle plate.

Straight stitching can be performed

with pattern selector in any position:
stitch width lever must be set at i
only.

NEEDLE POSITION

SELECTOR

Needle Position Selector positions

the needle in left ( ^ ), center ( ^ )or

right (1 ) needle positions. **

STITCH LENGTH
SELECTOR

The stitch length indicator is num­

bered 0 to 5. The lower numbers are
shorter stitches. Shorter stitches are
best for lightweight fabrics; longer
ones for heavy fabrics. To adjust the
length of your stitches, turn the dial so
that desired stitch length is positioned
under ( • ) symbol.

• To shorten stitch length, turn dial

toward a lower number.

• To lengthen stitch length, turn dial

toward a higher number.

Advertising
This manual is related to the following products: