Bowflex Xtreme 2 SE - Manual (Page 12)

8 Bowflex Xtreme ® 2 SE Assembly Manual
step 5 Install Squat Pulley Frame
Parts:
• Left Squat Pulley Frame
• Right Squat Pulley Frame
• Main Assembly
• 2 Slider Pulleys w/o Decal
• Left Squat Frame Connector
• Right Squat Frame Connector
Hardware:
• 1 Button Head Screw (3/8" X 5")
• 1 Nylock Nut (3/8")
• 6 Button Head Screws (3/8" X 3/4")
• 8 Washers (3/8")
tools: 7/32" Hex Wrench & Adjustable
or Socket Wrench
5-1 Place one Squat Pulley Frame on each side of
the Seat Support Rail as shown, and align the
top screw holes. Secure using a 3/8" X 5" screw,
washer and nut in the top hole as shown in
Detail 5a .
5-2 Install screws and washers through the bottom
holes of each Squat Pulley Frame into the
Support Rail as shown in Detail 5a .
5-3 Slide one Slider Pulley onto the free end of the
Left Squat Pulley Frame as shown in Detail 5b .
Lock the pulley in position near the Support Rail.
5-4 Slide the Left Squat Frame Connector onto the
end of the Left Frame Rail and the Left Squat
Pulley Frame .
5-5 Install screws and washers to secure the Squat
Frame Connector to the Squat Pulley Frame and
the Frame Rail as shown in Detail 5b .
5-6 Repeat Steps 5-3 through 5-5 for the Right
Squat Pulley Frame.
Button Head
Screw
Flat Washer
Nylock Nut
Left Squat
Pulley Frame
Flat
Washers
Button Head
Screws
5" Button Head
Screw
Assembly Guide
3/4" Button
Head Screw
Flat Washer
Left Squat
Pulley Frame
Slider Pulley
Detail 5a
Detail 5b
Slider Pulley
Flat Washer
Left Squat Frame
Connector
Flat Washer
Button Head
Screw
Left Frame Rail
Right Squat
Pulley Frame
Left Squat Frame
Connector
Right Squat Frame
Connector
Detail
5a
Detail
5b
Slider Pulley