Bowflex Xtreme 2 SE - Manual (Page 16)

12 Bowflex Xtreme ® 2 SE Assembly Manual
step 12 Install Seat Assembly
Parts:
• Seat Assembly
• Seat Locking Pin
• Main Assembly
12-1 Align the top two hooks on the Seat
Backbone with one of the pairs of pins on
the Seat Support Rail, as shown in Detail
12a .
12-2 Tip seat front up and slide
hooks onto pins. Rotate seat down and back
to use .
12-3 Slide the Seat Locking Pin through the holes
in the Seat Backbone hooks to secure the
seat assembly on the Seat Support Rail as
shown in Figure 12b .
note: Reverse procedure to remove seat .
Seat
Backbone
Seat Support
Rail
Assembly Guide
Seat Locking
Pin
Seat Locking
Pin installed
Detail 12b - Back View
Detail 12a