Cisco 15600 User Manual

Page 48

Advertising
background image

17-48

Cisco ONS 15600 Procedure Guide, R8.0

Chapter 17 DLPs E100 to E199

DLP- E159 Manually Lock or Unlock a User on Multiple Nodes

Step 6

Click OK.

Step 7

Return to your originating procedure (NTP).

DLP-E159 Manually Lock or Unlock a User on Multiple Nodes

Step 1

From the View menu, chose Go To Network View.

Step 2

Click the Provisioning > Security > Users tabs.

Step 3

Click the user you want to lock out.

Step 4

Click Change.

Step 5

Complete one of the following:

•

To lock a user out so the user cannot log into nodes on the network, check the Locked out check box.

•

If the user is currently locked out, uncheck the Locked out check box.

See the

“DLP-E130 Change Security Policy on a Single Node” task on page 17-26

for more

information about manual lockouts and lockout duration.

Step 6

Click OK. A confirmation dialog box appears.

Step 7

Click OK. Confirm that the changes appear; if not, repeat the task.

Step 8

Return to your originating procedure (NTP).

Purpose

This task manually locks out or unlocks a user from multiple nodes.

Tools/Equipment

None

Prerequisite Procedures

DLP-E26 Log into CTC, page 16-33

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Superuser

Advertising