Cold water operation, Ice-making operation – NewAir AI-400 Series User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cold Water Operation
Press the Cold Water button to begin the cold water ftinction. After this, the Cold Water indicator
will blink, meaning that the compressor has begun cooling the water. When the Cold Water
indicator changes from blinking to illuminating, the cold water has reached the desired
temperature and the cold water is ready. After awhile, or when the cold water is drained from the
cold water faucet, the cold water indicator will begin blinking again, indicating the cooling
process has begun. The Cold Water function and the Ice-making function can be operating at the
same time.
Ice-making Operation
Power Indicator
Ice-Maker Indicator
1.
Press the Ice-maker button on the operation panel to begin the ice-making cycle. The
Ice-maker indicator will start to blink.
2. The ice making cycle lasts 7 to 15 minutes, depending on the ambient temperature.
3. While the ice-maker is on, the unit will verify the water level periodically. If there is not
enough water to make ice, the ice maker will stop automatically, and the Warning indicator
will turn on, meaning that the water level will not be able to reach the required level for ice
making.
8