Precaution – NewAir AI-400 Series User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ice and Water
Next, you can wash the inside parts of the ice-making chamber with the dishwashing fluid, rinse,
and open the drain cap for the ice dispenser on the back. This will get the water out. Rinse
several times, and then securely return and fasten the drain cap. Immerse the removed ice, water
separator, and ice storing plate in the dishwashing fluid to clean. After rinsing and drying, install
both of these back to the original position with a screw and screwdriver.
PRECAUTION
•
When cleaning, the outside of the machine can be washed with a wet, soft cloth, but do not
use corrosive chemical solvents, as this may hurt the machine and alter its color. Be careful
not to pour water over the enclosure when washing, avoiding its internal electrical parts.
These should not get wet.
•
Keep the unit away from the wall with proper distance. Keep it far away from high
temperature surroundings and prevent it from being exposed to sunlight or other heat sources.
Keep the enclosure ventilated and cleared of any obstructions.
•
When the unit is not in use for an extended period of time, disconnect the power cord and
drain the water from both drain caps, refastening them tightly when finished. Do not touch
the faucets at this time in case of leakage.
•
Children should not touch the hot water tap as it can burn the skin.
12