Hot water operation – NewAir AI-400 Series User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATE THE UNIT
After plugging into the main power outlet, the POWER indicator on the control panel will be on.
This indicates you are ready to begin operating the hot and cold water or ice-making functions as
desired.
Hot Water Operation
Hot Water Indicator
Warning Indicator
Press the Hot Water button and the green Hot Water indicator above the button will begin blinking,
meaning that the heating element has begun to work. When this green indicator illuminates, this
means that the hot water has reached the desired temperature and is drinkable. After awhile, drain
out the hot water from the hot water faucet, and the Hot Water indicator will begin blinking again,
meaning that the heating element has been initiated.
If the hot water tank is empty after the first use, or after being drained, wait a few minutes and a
warning sound will go off ten times along with an indicator light. When the water bottle is
replaced, press the hot water button again to begin heating and to turn off the warning indicator.
If you do not want hot water, please press the Hot Water button again to save electricity and cost.
(After this, the Hot Water indicator will be off.)