NewAir AI-400 Series - Manual (Page 16)

Only Ice-making only is not
working
Ice Button and Ice
indicator on the
control panel
Ice-making function is not
turned on by the button.
Press the Ice-making button
Cold water function Both Ice-making and cold
water functions are running
together
Wait a few more minutes and stop
the Cold Water function first
Compressor is not running or
suddenly stops
Main power supply Voltage too low Contact an electrician or the
electricity department
Ventilation opening
blocked
Blocked Remove the substance blocking the
opening
Clearance around
the unit
Too small clearance or bad air
circulation
Leave enough space around the unit
(Min. 15 cm)
Condenser Too dirty, produce overheated Clean
Cooling system Refrigerant over charged or
leaked
Contact with qualified serviceman to
repair it
Compressor and
accessories
Breakdown Cali a serviceman to check and
repair
Warm indicator illuminates
and buzzes
Water bottle There is no water. Replace with a new bottle full of
water
Warm indicator flashes on the
control panel
Ice-making box in
the ice-making
chamber
The ice making box is clogged
by ice or some other
mechanism
Stop the unit and allow some time
for the clogged ice to melt
Water leaks from the taps or
the faucet
Water faucet button The water faucet button may be
clogged
Check it and let the button go out
Water faucet The water faucet has been
damaged.
Call your service or sales agent for
replacement information
Water is dripping out of the
water dispenser and onto the
floor.
Water bottle The bottle may have small
pinholes
Change to a new bottle
Water drain caps on
the back
Loose Tighten these completely and check
the sealing silicon material inside
the drain cap to make sure it is not
torn or damaged. If so, change to
new drain caps
Noise occurs Floor The appliance is not level. Install it evenly and lock the unit
Locating position Contact with other products Move it away from other products
14