Aiwa Z-L70 - Manual (Page 17)

Up to 30 tracks can be programmed from any of the inserted
discs.
-RANDOM/
REPEAT
To check the program
Each time ◄◄ or ►► is pressed in stop mode, a disc number,
track number, and program number wiil be dispiayed.
To clear the program
Press ■ CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last programmed track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly until di- appears on the display.
■ During programmed play, you can not use random play, check
the remaining time or select a track.
• “FULL” is displayed if you attempt to program more than 30
tracks.
a
z
i
a
a
Use the remote control.
1 Press PRGM twice in stop mode.
and “PRGM” appear on the display.
• When PRGM is pressed once in step 1, the unit enters the
CD KARAOKE PROGRAM (page 23).
2 Press DISC DIRECT PLAY, then press one of the
numbered buttons 1-5 within 3 seconds to select
a disc.
Go to the next step when the tray stops rotating.
3 Press the numbered buttons 0-9 and +10 to
program a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Selected track number Total number of selected tracks
biv ..
\
1
P
Program number Total playing time of the
selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press ◄►to start play.
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be
skipped during playback.
1 Press CD BLANK SKIP on the main unit.
“CD BLANK SKIP ON" is displayed and a small dot will appear
in the display.
Small dot
lijyiiliM
iTyjJ
He
14;3
II*
N. I
2 Press ◄► to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion will also be skipped.
To return to normal playback
Press CD BLANK SKIP again, “CD BLANK SKIP OFF” is
displayed and the dot in the display will disappear.
NOTE
' There may be a case where BLANK SKIP PLAY does not
function correctly.
' BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING (page 20), PROGRAMMED EDIT
RECORDING (page 21), or recording during PROGRAMMED
PLAY (left column) or RANDOM PLAY (page 16).
ENGLISH 1 7