Audio adjustments, Supert-bass system, Press t-bass – Aiwa Z-L70 User Manual

Page 9: Volume control, Bbe system, Press bbe, Using the headphones, Sound adjustment during recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SOUND

AUDIO ADJUSTMENTS

I

SUPERT-BASS SYSTEM

The T-BASS system enhances the realism of low-frequency

sound.

Press T-BASS.

Each time it is pressed, the level changes. Select one of the

three levels or the off position to suit your preference.

-X.

(A

Z

o

B

s

u

NOTE

Low-frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low-frequency sound is already
emphasized. In this case, cancel the T-BASS system.

VOLUME CONTROL

Turn VOLUME on the main unit, or press VOL yX

or N/ on the remote control.

The volume level is displayed as a number from 0 to MAX (50).
The volume level is automatically set to 20 when the power is

turned off with the volume level set to 21 or more.

BBE SYSTEM

The BBE system enhances the clarity of high-frequency sound.

It also enriches the Karaoke function to make your voice sound

clear and pleasant.

Press BBE.

Each time it is pressed, the level changes. Select one of the

three levels or the off position to suit your preference.

Using the headphones
Connect headphones to PHONES jack with a stereo standard

plug (

06.3

mm, 'A inch).

No sound is output from the speakers while the headphones are

plugged in.

Sound adjustment during recording

The output volume and tone (except BBE) of the speakers or

headphones can be freely varied without affecting the recording.

NOTE

V/hen piaying back a tape recorded with BBE, it is recommended

that BBE be set to off to avoid distorted high frequency sound.

ENGLISH

9

Advertising