Aiwa Z-L70 - Manual (Page 19)

DUBBING A TAPE MANUALI DUBBI
Li
Q
a o
o
111
a
Preparation
• Set the tape to the point where recording will start.
• The reverse mode is automatically set to Ti. Note that recording
will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into Deck 1 and the tape
to be recorded on into Deck 2.
Insert the tapes with the sides to be played back or recorded
on first facing out from the unit.
3 Press TAPE/DECK1/2 to select Deck 1.
“TP1” is displayed.
4 Press #REC/REC MUTE to start recording.
Playing and recording start simultaneously.
CTO
7FV licZREt.
To stop dubbing
Press ■.
This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
NOTE
• Dubbing does not start from a point halfway in the tape.
• The reverse mode is automatically set to !I). Recording will
be done on both sides.
1 Press TAPE.
2 Insert the original tape into Deck 1 and the tape
to be recorded on into Deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
3 Press SYNC DUB once or twice to start recording.
® For recording at normal speed, press it once to display
“NORM-DUB".
® For recording at high speed, press it twice to display
“HIGH-DUB".
NORM..t.-;
MX.............
f-UGH...Dlffi
•Cl,
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press ■.
NOTE
Recording does not start if the erasure prevention tab on either
side of the tape is broken off.
ENGLISH
19