Getting started, 1 development kit contents, Chapter 2. getting started – Digi JACKRABBIT BL1800 User Manual
Page 11: Etting, Tarted
User’s Manual
7
2. G
ETTING
S
TARTED
This chapter describes the Jackrabbit board in more detail, and
explains how to set up and use the accompanying Prototyping
Board.
NOTE: This chapter (and this manual) assume that you have the Jackrabbit Development
Kit. If you purchased a Jackrabbit board by itself, you will have to adapt the informa-
tion in this chapter and elsewhere to your test and development setup.
2.1 Development Kit Contents
The Jackrabbit Development Kit contains the following items:
•
BL1810 single-board computer.
•
Prototyping Board.
•
Universal AC adapter, 12 V DC, 1 A (includes Canada/Japan/U.S., Australia/N.Z.,
U.K., and European style plugs). If you are using another power supply, it must provide
7.5–25 V DC at 5 W.
NOTE:
The linear voltage regulator becomes rather hot for voltages above 15 V.
•
10-pin header to DB9 programming cable with integrated level-matching circuitry.
•
Dynamic C CD-ROM, with complete product documentation on disk.
•
Getting Started instructions.
•
A bag of accessory parts for use on the Prototyping Board.
•
Screwdriver.
•
Rabbit 2000 Processor Easy Reference poster.
•
Registration card.