Digi JACKRABBIT BL1800 - Manual (Page 43)

User’s Manual 39
4.2 Sample Programs
Sample programs are provided in the Dynamic C S A M P L E S folder.
The various folders contain specific sample programs that illustrate the use of the corre-
sponding Dynamic C libraries. For example, the sample program
PONG.C demonstrates
the output to the Dynamic C STDIO window.
The SAMPLES\JACKRAB folder contains sample programs that illustrate features unique to
the Jackrabbit.
Follow the instructions included with the sample program to connect the Jackrabbit and
the other hardware identified in the instructions.
To run a sample program, open it with the File menu (if it is not still open), then compile
and run it by selecting Run in the Run menu (or press F9 ). The Jackrabbit must be in
Program Mode (programming cable is attached to programming port as shown in
Figure 2) and must be connected to a PC using the programming cable.
More complete information on Dynamic C is provided in the Dynamic C User’s Manual.
The sample programs are listed in Table 4.
The first five sample programs provide a step-by-step introduction to the Jackrabbit board.
Additional sample programs illustrate more advanced topics.
Table 4. Jackrabbit Sample Programs
DEMOJR1.C
DEMOJR2.C
DEMOJR3.C
JRIOTEST.C
JR_FLOWCONTROL.C
JR_PARITY.C
JRIO_COF.C
LCD_DEMO.C
RABDB01.C
RABDB02.C